How to Build a Wooden Cabinet Shoe

This type of wooden cabinet shoe is simple but elegant and is very common in Japanese homes where they usually leave their shoes by the door. You can also build this storage cabinet to accommodate any closet, laundry room or hall; and you can have as many need shelves in the cabinet. Cut two pieces of wood 2 for 10 with a length of 18 inches. These will form the sides. 2 cut a piece measuring 10 to 38 inches in length. This will form the top. Sand the cut of each piece of wood until soft edges. Pay special attention to corners.

Mark your wood cabinet shoe pieces that measure 18 inches up to 6, 7 1/2 13 1/2 and 15 inches. Place a piece of one hand over her longer to the outside of your left side facing edge. Place one of your inner shelves so that its end rests between the marks 6 and 7 1/2 inches . Using your drill, entornilla the shelf in place, leaving 1/4 inch of exposed screw. The screws should enter the outside of the piece aside and cross the edge of the ledge. Make sure the screws are at an inch from each edge of the side panel when they entornillados. Repeat with the other side piece and the opposite end of the shelf.

12 Photos Gallery of: How to Build a Wooden Cabinet Shoe

Image of: How To Make A Shoe Cabinet

Image of: How To Build A Shoe Rack Cabinet Ideas

Image of: Wooden Shop Storage Cabinet

Image of: How To Make A Wooden Storage Cabinet

Image of: Melamine Shoe Cabinet

Image of: Fashion Shoe Storage Cabinets Ideas For The Fancy

Image of: Wood Faux Cabinet Shoe

Image of: Best Cabinet Shoe

Image of: How To Make Shoe Cabinet

Image of: Handmade Shoe Cabinet

Image of: Building A Shoe Rack Cabinet

Image of: Drawer Shoe Cabinet

 


Share: