Add some design to a simple window with a Roman shades. This is a project somewhat difficult for those who make simple crafts. Measure the window, the roman shades should be just above the window and be 2 cm wider on each side. Add 5cm. the original length. Cut the fabric and lining as. It hooks right sides and lining fabric. Sewn along the edges and the underside. Cut diagonally across the two lower corners. Make a seam 6 mm. along the bottom edge.
The roman shades, insert the timber tube or roll between the two rows of stitching along the bottom edge. Turn right curtains and press all edges. Softens how hooked fabric and lining to not wrinkle as you sew. Use a ruler and pencil to draw a line of 5 cm. from the lower edge. Divide and pencil mark with the remaining curtains in two equal horizontal sections about 20.30 cm apart, with the middle section of one half in the bottom of the curtains.
12 Photos Gallery of: How to Make Roman Shades
Roman shades cut strips extras lining 7.5 cm in width and length of the curtains. These strips will need to have where to place each tube of wood. Fold each strip in half widthwise, right sides. By sewing one end and then the long edge. Flip it upside down and press.