Sew a Cover for Rectangular Dog Beds

Jun 19th

Measure the length and width of the rectangular dog beds for you to know how much fabric to buy. Double the length and add 5 inches (12.7 cm) extra each side to cover the top and bottom. For one that is 4 ft (1.21 m) long and 2 feet (0.60 m) wide fabric you will need 8 feet (2.56 m) to 5 inches (0.73 m) long by 2 feet (0.60 m) to 5 inches (0.73 m) wide. Wash, dry and iron the fabric before starting. This makes it easier to sew and makes it easier on your pet. Fold the fabric in half horizontally, then cut directly in half, leaving two pieces of the same size.

Wood Dog Beds
Wood Dog Beds

Place a piece of cloth on a flat surface with the back up. Place the bed on it and trace the outline with a pencil, mark the dimension or with pins. Repeat this step with the other piece. Place the two pieces together so that the two sides are back out, then put pins to gather the fabric for dog beds.

12 Photos Gallery of: Sew a Cover for Rectangular Dog Beds

Image of: Big Dog Beds
Image of: Creative Ideas Dog Beds
Image of: Dog Beds Ideas
Image of: Dog Beds Picture
Image of: Double Dog Beds
Image of: Good Dog Beds
Image of: Great Dog Beds
Image of: Modern Dog Beds
Image of: Rustic Dog Beds
Image of: Simple Dog Beds
Image of: Vintage Dog Beds
Image of: Wood Dog Beds
 

Seam 3 inches (7.62 cm) from the line you drew starts, and sew 3 sides leaving one open, so you can enter the dog beds. Flip the cover to the right and put the bed inside. Sewing the open side ends. Cut off any excess threads and be sure.

RELATED:   How to Make Mirror Furniture